1-541-955-6900

success@visp.net

Login

Networks Documentation

Network Documentation

Allow Pre-signup Authentication

Let’s say you have a building that buys internet access from you that it supplies free and anonymously for all tenants. You earn revenue from the main connection but also when tenants upgrade to faster packages. Before, each of those tenants could not connect their...

Set-up SmartSession Authentication

VISP’s HyperRadius has many unique powerful features, one of which is SmartSession. SmartSession will allow you to make changes to your subscribers that are authenticated on Mikrotik devices, on the fly, including disconnects and package speed changes, right from...

Assigning a Static IP Address

When assigning static IP addresses through Visp.net, we recommend setting the IP into static if it is not included in the DHCP server's address pool. Visp can't tell Mikrotik which IP is not available for leases. When the static option is enabled, the RADIUS will...

Location ID

Setting up a location ID for your internet package allows you to: Restrict the location where the package is displayed on the signup page. Apply location-based authentications. Use the location ID of the customer's subscribed package to filter the upgrade package list...

RADIUS Configuration

This section configures your Mikrotik router to communicate with the Visp.net HyperRADIUS servers. Primary Click Radius (left) and click (+) symbol to add a radius server. Under the General tab, select Hotspot, PPPoE, or DHCP for Service Address: 52.89.100.186 Secret...

Mikrotik DHCP Configuration

Client Isolation Recommendations AP’s should use Client-Isolation. This reduces load and improves reliability.  Repeating broadcast messages between subscribers increases network load and can allow for rogue DHCP servers or other broadcast services to exist on the...

PPPoE Configuration

These instructions assume that you have a new Mikrotik with little to no existing configuration.  It specifies certain IP ranges which are commonly used; however, you can replace the IP ranges referenced below with your own custom ranges if you wish.  Likewise, if you...

Mikrotik Hotspot Configuration

Initial Setup If you’re using a new Mikrotik router, we recommend resetting the device to remove the preinstalled configuration as it contains settings you will probably not need. You may also need to upgrade your RouterOS to the latest stable version, from...

Videos and Tutorials

Documentation

Team Support

Changelog

FAQ

Features & Extensions

?